Wick a 2-part mould
- Cut mould along score line, also taking off the edges of cast, leaving about 1cm around the shape. The mould will fit together using the locator spots.
- Locate the wick from along one side using the wick indent at the top to locate it
- Tape wick to the mould top and bottom
- Put a tiny piece of blue tac in the dent of the wick indicator.
- On the other half cut a semi-circular hole in the base so you can pour in the wax
- Put the two halves together
- Place strong clamps (paper foldback clips) around the edges
- Stand the mould in pebbles, or an old mug/bucket/tin and pour in the wax
Share with others